Surface-temperature information for the legacy LAVA panels covered by the linked installation manual.
The linked legacy LAVA installation manual lists an approximate maximum surface temperature of 203°F (95°C). It also describes the unit restarting after cooling below 113°F (45°C).
These figures apply to the models covered by that manual. They are not specifications for Ember panels or every later LAVA model.
The surface can cause burns. Keep the specified clearances, avoid touching a hot panel, and switch off electrical power and allow it to cool before maintenance. If the panel does not operate normally, contact WarmlyYours Technical Support; internal thermal-limit devices are not a user adjustment.
Sources
- Manufacturer instructions (publication 1695), PDF pp. 2 and 7–8.