Contact Us After Hours

Loading...

Loading contact options...

Sign In

Loading...

Loading...


Living Large on 14 Sq. Ft.: A Heated Tiny House Bath in NJ

A 120V TempZone Flex Roll warms 14 sq. ft. of tile in the “Tiny Living, Living Large” mobile tiny house bathroom for about $0.048 an hour.

Pennington, NJ
Size: 30 sq.ft. Voltage: 120V Wattage: 203 W Amps: 1 A Flooring: Tile, Marble or Stone Cost/hr *: $0.048

How a 120V TempZone Flex Roll turned the stone-and-tile bathroom of a mobile tiny house into a warm, dry spa retreat

In the “Tiny Living, Living Large” mobile tiny house, the bathroom’s tile and stone floor had to look luxurious without feeling like an ice box. Creators Julia V. and Robert Barclay partnered with WarmlyYours to install a TempZone Flex Roll under 14 sq. ft. of tile, giving the compact room steady warmth for about $0.048 an hour.

Project Details

SpecificationDetail
LocationPennington, NJ (mobile tiny house)
Space TypeTiny House Bathroom
Flooring / Surface TypeTile, Marble, or Stone
System TypeRadiant Floor Heating
Total Square Footage14 sq. ft. heated
Technical Specs120V / 203W
Watt Density15 W/sq. ft.
Products UsedTempZone Flex Roll, Circuit Check, Integration Relay (120V)
Operating Cost~$0.048 / hour
Installer / ContractorJulia V. & Robert Barclay (“Tiny Living, Living Large”)

The Problem: Beautiful Tile in a Home Exposed to the Elements

A tiny house on the move faces the weather on every side, and its tile and stone bathroom floor showed it. Every step out of the shower meant a cold floor, and in a space this small there was no room for a bulky heater to fix it.

The Solution: A Cut-and-Turn Heating Cable Around Tight Fixtures

The TempZone Flex Roll’s cut-and-turn mesh let the heating cable follow the bathroom’s compact plumbing and fixtures across 14 sq. ft. Robert Barclay used a Circuit Check during the build to monitor the cable before the floor was finished, and a membrane and tile were set over the heating cable. An Integration Relay (120V) connects the floor heating to the home’s Control4 automation system.

The Outcome: Spa Warmth That Travels With the House

The tile floor now acts as a gentle radiator, keeping the bathroom warm and dry even when the tiny house is parked through a New Jersey winter. The project shows that a small footprint doesn’t have to mean giving up comfort.

Comparative Cost Highlight

Operating at approximately $0.048/hour, this system costs roughly $11.50/month at 8 hours a day—less than a streaming subscription—while providing unmatched barefoot comfort.

Featured Products

  • TempZone Flex Roll : Thin heating cable on a cut-and-turn mesh that fit around tight tiny-house fixtures at 15 W/sq. ft.
  • Circuit Check: Monitored the heating cable during the build, before the tile was set.
  • Integration Relay (120V): Linked the floor heating to the home’s Control4 automation system.

Follow the project: tinylivinglivinglarge.com · Instagram @tinylivinglivinglarge · X @TinyLLLarge

* About $0.048 per hour; roughly $0.38 per day and $11.50 per month at 8 hours of daily use.

Frequently Asked Questions

Showing all 5 questions

Answer: This system costs about $0.048 per hour to run.

Explain: At just 203W, the heating cable draws very little power, so running it 8 hours a day comes to about $0.32.

Example: For this 14 sq. ft. tiny house bathroom in Pennington, NJ, that is roughly $11.50 a month.

Answer: Yes. The TempZone Flex Roll is designed to be cut and turned around obstacles.

Explain: Its mesh can be cut so the roll changes direction while the heating cable stays continuous.

Example: In this project, the cable followed the tiny house's compact plumbing and fixtures across 14 sq. ft.

Answer: Yes. This tiny house bathroom uses floor heating under tile, marble, or stone.

Explain: The heating cable sits beneath the floor finish, turning the tile into a gentle radiant surface.

Example: The heated floor keeps this bathroom warm and dry even when the house is parked through a New Jersey winter.

Answer: Yes. This project uses an Integration Relay (120V) to connect the floor heating to home automation.

Explain: The relay lets the home's automation system switch the 120V heating circuit.

Example: Here it links the TempZone Flex Roll to the tiny house's Control4 system.

Answer: With a WarmlyYours Circuit Check.

Explain: The Circuit Check monitors the heating cable while the floor is being built.

Example: Robert Barclay used it during this build before the tile was set over the TempZone Flex Roll.

Project Quote

Products used in this project, ready to add to your cart.

Tell Us About Your Project

Our team of Radiant Experts is ready to help.

Typically respond within 1 business day

Disclaimer: Images reflect individual client installations; however, strict compliance with the NEC and specific manufacturer installation manuals is required for all systems. For specific guidance on your layout, please contact our engineering support team.